Emerson 630 Regulator Arkusz Danych

Przeglądaj online lub pobierz Arkusz Danych dla Nie Emerson 630 Regulator. Emerson 630 Regulator Data Sheet Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 16
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Bulletin 71.1:630
December 2012
D100121X012
www.fisherregulators.com
Type 630 Regulator
Introduction
The Type 630 Big Joe™ regulators are direct-
operated, spring-loaded, pressure reducing regulators.
They are available in 1 and 2-inch / DN 25 and 50
body sizes, and they are designed for maximum inlet
pressures to 1500 psig / 103 bar and outlet pressures
from 3 to 500 psig / 0.21 to 34.5 bar. The Type 630
can be used with natural gas, air, or a variety of other
gasesforsuchapplicationsasrst-stagefarm-tap
regulators or high-pressure industrial regulators.
TheType630canbeconvertedintheeldtoa
relief valve or is available as the Type 630R relief
valve/backpressure regulator; refer to the separate
Type 630R Bulletin (71.4:630R) for information.
Features
High-Pressure Capabilities—Inlet pressures up
to 1500 psig / 103 bar and control pressures up to
500 psig / 34.5 bar.
Rugged Construction—Compact, sturdy design
and solid metal construction provide a strong,
reliable, long-lasting regulator.
Better Low-Pressure Control—The Type 630
is available in both high-pressure and low-pressure
constructions; the low-pressure units have a larger
diaphragm area to provide more accurate control of
low-pressure settings.
Sour Gas Service Capability—Optional materials
are available for applications handling sour
gases. These constructions comply with
the recommendations of the NACE
International MR0175.
Figure 1. Type 630 Big Joe High-Pressure Regulator
W1934
The manufacturing processes and materials
used by Fisher
®
Controls assure that all products
speciedforsourgasservicecomplywiththe
chemical and physical requirements of NACE
International MR0175.
Przeglądanie stron 0
1 2 3 4 5 6 ... 15 16

Podsumowanie treści

Strona 1 - Type 630 Regulator

Bulletin 71.1:630December 2012D100121X012www.fisherregulators.comType 630 RegulatorIntroductionThe Type 630 Big Joe™ regulators are direct-operated, s

Strona 2

Bulletin 71.1:630 10Table 4. 2-Inch / DN 50 Body Capacities (Based on 20% Droop) (continued)OUTLET PRESSURE RANGE, SPRING PART NUMBER, AND COLORINLE

Strona 3

Bulletin 71.1:630 11Table 4. 2-Inch / DN 50 Body Capacities (Based on 20% Droop) (continued)OUTLET PRESSURE RANGE, SPRING PART NUMBER, AND COLORINLE

Strona 4

Bulletin 71.1:630 12OUTLET PRESSURE RANGE, SPRING PART NUMBER, AND COLORINLETPRESSUREOUTLETPRESSURE2-INCH / DN 50 BODY CAPACITIES IN SCFH / Nm3/h OF

Strona 5

Bulletin 71.1:630 13BODY SIZENPT DIMENSIONSA B C D E FLow-Pressure RegulatorINCH DNInches mm Inches mm Inches mm Inches mm Inches mm Inches mm1 2 25 5

Strona 6

Bulletin 71.1:630 14BODY SIZEFLANGED DIMENSIONSA B EF GLCL150CL300 and CL600CL150CL300 and CL600Low-Pressure RegulatorINCH DN Inches mm Inches mm Inch

Strona 7

Bulletin 71.1:630 15Ordering InformationThen,carefullyrevieweachspecicationandcomplete the Ordering Guide below. To ensure orderingaccuracy,

Strona 8

©Emerson Process Management Regulator Technologies, Inc., 1975, 2012; All Rights ReservedBulletin 71.1:630 The Emerson logo is a trademark and service

Strona 9

Bulletin 71.1:630 2SpecicationsBody Sizes 1 and 2-inch / DN 25 and 50End Connection Style NPT, ASME CL150 RF, CL300 RF, or CL600 RFMaximum Inlet

Strona 10 - Bulletin 71.1:630

Bulletin 71.1:630 3Figure 2. Type 630 Sectional ViewsFULL SECTIONSPRINGCASEDIAPHRAGMDIAPHRAGM CONNECTORDIAPHRAGMADAPTORVALVE DISKAND HOLDERORIFICEINL

Strona 11

Bulletin 71.1:630 4To determine the wide-open capacity for relief sizing withtheowcoefcients(Cg), use the appropriate procedure below.1. Ifow

Strona 12

Bulletin 71.1:630 5Table 3. 1-Inch / DN 25 Body Capacities (Based on 20% Droop)OUTLET PRESSURE RANGE, SPRING PART NUMBER, AND COLORINLETPRESSUREOUTL

Strona 13

Bulletin 71.1:630 6Table 3. 1-Inch / DN 25 Body Capacities (Based on 20% Droop) (continued)OUTLET PRESSURE RANGE, SPRING PART NUMBER, AND COLORINLET

Strona 14

Bulletin 71.1:630 7Table 3. 1-Inch / DN 25 Body Capacities (Based on 20% Droop) (continued)OUTLET PRESSURE RANGE, SPRING PART NUMBER, AND COLORINLET

Strona 15

Bulletin 71.1:630 8OUTLET PRESSURE RANGE, SPRING PART NUMBER, AND COLORINLETPRESSUREOUTLETPRESSURE1-INCH / DN 25 BODY CAPACITIES IN SCFH / Nm3/h OF 0

Strona 16

Bulletin 71.1:630 9Table 4. 2-Inch / DN 50 Body Capacities (Based on 20% Droop)OUTLET PRESSURE RANGE, SPRING PART NUMBER, AND COLORINLETPRESSUREOUTL

Komentarze do niniejszej Instrukcji

Brak uwag