Emerson SR5 Przewodnik Instalacji Pobierz pdf

D103099XENG

Installation Guide

English – February 2006

Type SR5

www.emersonprocess.com/regulators

Introduction

This installation guide provides instructions for

installation, startup, and adjustment. To receive a copy

of the instruction manual, contact your local Fisher

Sales Ofce or Sales Representative or view a copy

at www.emersonprocess.com/regulators. For further

information refer to:

Type SR5 instruction manual (form 5786,

D103099X012).

P.E.D. Categories

This product may be used as a pressure accessory with

pressure equipment in the following Pressure Equipment

Directive 97/23/ EC categories. It may also be used

outside of the Pressure Equipment Directive using sound

engineering practice (SEP) per table below.

PRODUCT SIZE CATEGORIES FLUID TYPE

DN 15, 20, and 25 (1/2 thru 1-inch) SEP

DN 40 x 25, 40, and 50

(1-1/2 x 1, 1-1/2, and 2-inch)

DN 80 (3-inch) II

Specications

Available Constructions

Type SR5: Pressure reducing regulator designed for

use in sanitary applications. DN 15, 20, 25, 40 x 25,

50, and 80 (1/2, 3/4, 1, 1-1/2 x 1, 2, and 3-inch) body

sizes are suitable for controlling steam, liquids and

gasses. DN 40 (1-1/2-inch) is suitable for steam and

gasses, it is not for use on liquids. End connections

match up to Tri-Clamp® sanitary ttings.

Maximum Inlet and Outlet Pressures

(1)

DN 15 to 40 (1/2 to 1-1/2-inch):

14,5 bar at 65 °C (210 psig at 150 °F)

12,4 bar at 135 °C (180 psig at 275 °F)

11 bar at 204 °C (160 psig at 400 °F)

DN 50 and 80 (2 and 3-inch):

Maximum Inlet Pressure:

14,5 bar at 65 °C (210 psig at 150 °F)

12,4 bar at 135 °C (180 psig at 275 °F)

11 bar at 204 °C (160 psig at 400 °F)

Maximum Outlet Pressure:

10,3 bar at 65 °C (150 psig at 150 °F)

8,62 bar at 135 °C (125 psig at 275 °F)

7,58 bar at 204 °C (110 psig at 400 °F)

Proof Test Pressure

All Pressure Retaining Components have been

proof tested per Directive 97/23/EC - Annex 1,

Section 7.4

Outlet Pressure Ranges

(1)

DN 15, 20, 25 and 40 x 25 (1/2, 3/4, 1 and

1-1/2 x 1-inch): 0,2 to 0,5 bar (2 to 8 psig), 0,4

to 1,7 bar (5 to 25 psig), 0,7 to 3,4 bar (10 to

50 psig), 1,7 to 6,2 bar (25 to 90 psig), and 2,4

to 9,3 bar (35 to 135 psig)

DN 40 (1-1/2-inch): 0,4 to 1,7 bar (5 to 25 psig), 0,7

to 3,4 bar (10 to 50 psig), 1,7 to 5,2 bar (25 to 75

psig), and 2,4 to 6,9 bar (35 to 100 psig)

DN 50 and 80 (2 and 3-inch): 0,7 to 1,7 bar (10 to

25 psig), 1,0 to 3,4 bar (15 to 50 psig) and 1,7 to

5,2 bar (25 to 75 psig)

Temperature Capabilities

(1)

Metal Seat (316L SST)

Ethylenepropylene (EPDM) Diaphragm and O-ring:

-28 to 135 °C (-20 to 275 °F)

316L SST Diaphragm and PTFE/FKM O-ring:

-6 to 204 °C (20 to 400 °F)

PTFE/FKM Diaphragm and O-ring:

-6 to 204 °C (20 to 400 °F)

Soft Seat (PTFE/316L SST)

Ethylenepropylene (EPDM) Diaphragm and O-ring:

-28 to 65 °C (-20 to 150 °F)

316L SST Diaphragm and PTFE/FKM O-ring:

-6 to 65 °C (20 to 150 °F)

PTFE/FKM Diaphragm and O-ring:

-6 to 65 °C (20 to 150 °F)

PEEK Seat (PEEK/316L SST)

Ethylenepropylene (EPDM) Diaphragm and O-ring:

-28 to 135 °C (-20 to 275 °F)

316L SST Diaphragm and PTFE/FKM O-ring:

-6 to 204 °C (20 to 400 °F)

PTFE/FKM Diaphragm and O-ring:

-6 to 204 °C (20 to 400 °F)

1. The pressure/temperature limits in this installation guide and any applicable standard or code limitation should not be exceeded.

1 2 3 4

Type SR5 1

Podsumowanie treści

Strona 1 - Type SR5

D103099XENGInstallation GuideEnglish – February 2006Type SR5 www.emersonprocess.com/regulatorsIntroduction This installation guide provides instructio

Strona 2

2Type SR5 Installation Only qualied personnel should install or service a regulator. Regulators should be installed, operated, and maintained in acc

Strona 3

3Type SR5 676914151STANDARD REGULATOR WITH ELASTOMERIC DIAPHRAGMVIEW B — METAL DIAPHRAGM FOR STANDARD REGULATORSOFT SEAT OPTIONVACUUM PROTECTION OPTIO

Strona 4

Type SR5 The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher