Emerson EZH and EZHSO Series Pressure Reducing Regulators Instrukcja Obsługi Strona 18
- Strona / 36
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Europe,
Middle
East,
and
Africa
Document
Only
Types EZH and EZHSO
18
3. Remove the O-ring (key 75). Inspect for damage or
wear, and replace if necessary.
4. Remove the O-ring (key 69). Inspect for damage or
wear, and replace if necessary. Lightly lubricate O-ring
before placing inside cap (key 70).
5. Remove smart screws (key 68) from sleeve.
6. Fit eye bolt (key 35) into ring nut (key 73) threaded hole.
7. Carefully remove the trim system from the sleeve guide
utilizing the eye bolt (key 35).
8. Remove the hex socket cap screws (key 33) and lock
washers (key 32).
9. Lift off the disk retainer (key 31) and disk assembly
(key 30). Inspect for damage or wear, and replace
if necessary.
10. Remove the O-ring (key 29). Inspect the O-ring for
damage or wear, and replace if necessary.
11. Place disk assembly (key 30) onto disk retainer (key 31).
12. Place disk retainer assembly into sleeve adapter
(key 27) and align screw holes.
13. Place lock washer (key 32) on screws (key 33).
14. Screw together the disk retainer assembly into the
sleeve adapter assembly. See Torque Specication
table for proper torque.
15. Lubricate the sleeve (key 14).
16. Carefully insert the trim system into the sleeve guide
(key 61) utilizing eye bolt (key 35). Align sleeve utilizing
the socket head cap screw (key 74) as a guide.
17. Screw smart screws (key 68) to afx the sleeve system.
See Torque Specication table for proper torque.
18. Remove eye bolt (key 35) from ring nut (key 73)
threaded hole.
19. Carefully place the cap on the upper casing (key 11).
20. Lubricate cap screws (key 77) and attach cap (key 70)
to the upper casing using cap screws (key 77).
See Torque Specication table for proper torque.
Note
Rotate the cap such that the outer holes for
sensing lines are in line with upper casing
holes for sensing lines: to validate the
alignment and before attaching cap, check
that travel indicator is aligned on the cap and
on the upper casing.
21. Mount O-ring (key 75) on the cap.
22. Screw the eye bolts (key 35) on the cap (key 70).
Disk Maintenance Type EZHSO DN 100
(Figure 19)
1. Remove cap screws (key 77).
2. Carefully lift the cap (key 70) off of the upper casing
(key 11).
3. Remove O-ring (key 75). Inspect the O-ring for damage
or wear, and replace if necessary.
4. Remove O-ring (key 69). Inspect the O-ring for damage
or wear, and replace if necessary. Lubricate O-ring
before placing inside cap.
5. Remove special screws (key 68) from sleeve.
6. Carefully remove the trim system from the sleeve guide
utilizing the eye bolt (key 35) or stem nut.
7. Remove socket head cap screws (key 154).
8. Lift off the disk holder assembly (key 30).
9. Remove the O-ring (key 29). Inspect the O-ring for
damage or wear, and replace if necessary. Lightly
lubricate O-ring before placing in the sleeve adaptor
(key 27).
10. Place disk holder assembly (key 30) into sleeve adaptor
(key 27) and align screw holes.
11. Place on screws (key 154). Screw together the disk
holder assembly into the sleeve adaptor assembly.
See Torque Specication table for proper torque.
12. Lubricate the sleeve (key 14).
13. Carefully insert the trim system into the sleeve guide
(key 61). Align sleeve utilizing the socket hex cap screw
(key 74) as a guide.
14. Screw smart screws (key 68) to afx the sleeve system.
See Torque Specication table for proper torque.
15. Place O-ring (key 69) on the cap (key 70).
16. Carefully place the cap on the upper actuator casing
(key 11).
17. Lubricate cap screws (key 77) and attach cap (key 70)
to the upper casing using cap screws (key 77).
See Torque Specication table for proper torque.
Note
Rotate the cap such that the outer holes for
sensing lines are in line with upper casing
holes for sensing lines: to validate the
alignment and before attaching cap, check
that travel indicator is aligned on the cap and
on the upper casing.
18. Mount O-ring (key 75) on the cap.
Powiązane produkty i podręczniki dla Akcesoria i części samochodowe Emerson EZH and EZHSO Series Pressure Reducing Regulators
(20 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.379 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji