Emerson NetSure DCS 48375 Instrukcja Obsługi Pobierz pdf (Strona 12)

UM584622100 Installation and User Instructions

Issue AC, July 3, 2012 Spec. Nos. 584622100, 584622200, 584622300, 584622400 (Model DCS48375)

Page 6 Chapter 2. Installing the System

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.

Securing the Expansion Shelf(s) to a Relay Rack and

Installing the Expansion Wiring Cover on the Main Shelf

SECURING AN EXPANSION SHELF TO A RELAY RACK

Secure an expansion shelf to a relay rack, directly below the shelf above it, per the

previous procedure. The optional 1U wiring access panel is recommended for expansion

shelves to facilitate load cable connections.

INSTALLING THE EXPANSION WIRING COVER ON THE MAIN SHELF

PERFORM THIS PROCEDURE AFTER PARALLELING THE OUTPUTS OF BOTH

SHELVES AS DESCRIBED IN THE “MAKING ELECTRICAL CONNECTIONS”

CHAPTER.

Procedure

1) Remove the cover shown in Figure 2-3 from the main shelf.

2) Remove the expansion wiring cover from the expansion shelf as shown in Figure

2-3.

3) On the expansion wiring cover for both the expansion shelf and the main shelf

(provided loose with the expansion shelf), remove the tabs shown in Figure 2-3

so wiring can pass between the shelves. Apply the provided material along the

exposed edges of the cutouts to provide protection to the wires as they are

passed between shelves.

4) Make the paralleling connections as described in the “Making Electrical

Connections” chapter.

5) Refer to Figure 2-3, and install the expansion wiring covers to both the main shelf

and the expansion shelf.

Expansion Wiring Cover

(supplied loose with Expansion

Shelf, attach to Main Shelf)

Replace this cover with the

Expansion Wiring Cover

Remove these tabs at the bottom of the top shelf and

at the top of the bottom shelf to allow wiring between

shelves.

Apply the provided material along the exposed edges

of the cutouts to provide protection to the wires as they

are passed between shelves.

584622100 / 584622200 shown.

584622300 / 584622400 similar.

Figure 2-3

Installing the Expansion Wiring Cover on the Main Shelf

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag

Emerson NetSure DCS 48375 Instrukcja Obsługi Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Emerson NetSure DCS 48375