Emerson PMC-CGM Instrukcja Użytkownika Pobierz pdf (Strona 48)

PMC-CGM Installation and Use (6806800D53C)

MIB Description cgmControl

.1.1.1.1.3 cgmInputFrequency Configures the input frequency:

0: 8 KHz

1: 1544 KHz / 2048 KHz, depending on E1/T1

operation.

3: 19.44 MHz

r/w

.1.1.1.1.4 cgmT0InputPriority This setting is applied to the protection partner

as well.

A priority value from 2 to 15 used by the T0 PLL

to select an input. A lower numerical value

means a higher priority. A value of 0 disables

the input, that means it will not be selected as

reference clock. A value of 1 cannot be set as

it is used for the master/slave synchronization

clock.

Default value is 0.

r/w

.1.1.1.1.5 cgmT4InputPriority Priority of frequency monitor (T4 Path). Lower

numerical values represent a higher priority

than greater values.

A value of 0 means that the input will never be

selected as active input.

Default value is 0.

r/w

.1.1.1.1.6 cgmInputState Indicates whether the input receives a valid

clock or not.

r/w

.1.1.1.1.7 cgmInputActivityMonitorEna Controls whether the activity monitor for this

input is enabled.

r/w

.1.1.1.1.8 cgmInputActivityMonitorState Reports the state of the activity monitor for this

input.

Table 5-3 Input Assignments

Instance cgmInputNumber cgmInputName

Default

cgmInputFrequency

2 3 BITS1 freqE1T1 (1)

3 4 BITS2 freqE1T1 (1)

6 7 REFA freq8K (0)

10 11 MS_SYNC freq8K (0)

11 12 REFB freq8K (0)

Table 5-2 cgmInputTable (continued)

OID MIB Object Description Access

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 65 66

Komentarze do niniejszej Instrukcji

Brak uwag

Emerson PMC-CGM Instrukcja Użytkownika Strona 48

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Emerson PMC-CGM