Emerson 3051S Dokumentacja Pobierz pdf (Strona 95)

Reference Manual

00809-0100-4801, Rev FA

October 2010

5-5

Rosemount 3051S Series

REASSEMBLY

PROCEDURES

IMPORTANT

The V-Seal must be installed at the bottom of the housing.

Attach SuperModule to

PlantWeb or Junction

Box Housing

1. Apply a light coat of low temperature silicon grease to the SuperModule

threads and O-ring.

2. Thread the housing completely onto the SuperModule. The housing must

be no more than one full turn from flush with the SuperModule to comply

with explosion-proof requirements.

3. Tighten the housing rotation set screw using a

/32-inch hex wrench.

Install Interface

Assembly in the

PlantWeb Housing

1. Apply a light coat of low temperature silicon grease to the SuperModule

connector.

2. Insert the SuperModule connector into the top of the SuperModule.

3. Gently slide the assembly into the housing, making sure the pins from

the PlantWeb housing properly engage the receptacles on the assembly.

4. Tighten the captive mounting screws.

5. Attach the PlantWeb housing cover and tighten so that metal contacts

metal to meet explosion-proof requirements.

Install the Terminal Block PlantWeb Housing

1. Gently slide the terminal block into the housing, making sure the pins

from the PlantWeb housing properly engage the receptacles on the

terminal block.

2. Tighten the captive screws on the terminal block.

3. Attach the PlantWeb housing cover and tighten so that metal contacts

metal to meet explosion-proof requirements.

Junction Box Housing

1. Apply a light coat of low temperature silicon grease to the SuperModule

connector.

2. Insert the SuperModule connector into the top of the SuperModule.

3. Push the terminal block into the housing and hold for screw position

alignment.

4. Tighten the captive mounting screws.

5. Attach the Junction Box housing cover and tighten so that metal contacts

metal to meet explosion-proof requirements.

NOTE

If the installation uses a manifold, see “Rosemount 305, 306 and 304

Manifolds” on page 2-21.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 239 240

Komentarze do niniejszej Instrukcji

Brak uwag

Emerson 3051S Dokumentacja Strona 95

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Emerson 3051S