Emerson FM-3 Instrukcja Instalacji Pobierz pdf (Strona 117)

103

Parameter Descriptions

Drive Input Raw DriveInput.#.Raw

This displays the raw state of the digital input without debounce or forcing to override the raw

status.

Drive Input Status DriveInput.#.Status

This source is the state of the input after debounce and forcing are taken into account.

Drive Output Force DriveOutput.#.Force

A drive output can be forced either On or Off with this parameter. If the ForceEnable bit is

activated, the DriveOutput.#.State will be set to this value.

Drive Output Force Enable DriveOutput.#.ForceEnable

If DriveOutput.#.ForceEnable parameter is activated, then the state of the

DriveOutput.#.Force bit will override the current output state.

Drive Output Name DriveOutput.#.Name

This is a text string up to 12 characters that can be assigned to a given output. It allows the

user to use application specific terminology in naming digital outputs.

Drive Output State DriveOutput.#State

This destination sets the current state of an output line.

Drive Output Encoder Scaling Enable DriveOutputEncoder.ScalingEnable

When on, this parameter enables the use of the drive encoder output scaling feature.

Drive Output Encoder Scaling DriveOutputEncoder.Scaling

This parameter allows scaling of the drive encoder output resolution in increments of one line

per revolution. Allowable range is from one line per revolution up to the actual density of the

encoder in the motor. If the Encoder output scaling is set greater than the motor encoder

density the output scaling will be equal to the motor encoder density.

Drive Serial Number DriveSerialNumber

This displays the serial number of the Drive to which the FM-3 is attached.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 229 230

Brak uwag

Emerson FM-3 Instrukcja Instalacji Strona 117